User's manual
Scan tab, select the jaw (upper or lower) with the preparation and
2. On the
scan it. Make sure you scan the entire occlusal surface.
3. Click Bite.
A Time Saver message appears when the preparation is scanned first.
The time saver option allows you to duplicate the preparation model and
to use the same data for the bite registration model.
If you do not wish to use the Time Saver, the bite registration and
adjacent teeth can be scanned on their own.
To use time saver click OK.
NOTE
Time Saver cannot be used with Impression Mode.
Planmeca FIT CAD/CAM system
12 Scanning
75