Planmeca FIT CAD System User Manual page 154

18 Functions in Planmeca Romexis
Version
Reset warnings
Sprue angle method
146 Planmeca FIT CAD/CAM system
Displays the version of the software.
You can select the option
operator is using the system, you may want to reactivate these warnings.
(For mill systems)
When the default setting
commonly recommended position for the selected type of restoration.
Optimized the placement is based on the fastest milling
When selecting
time. In all cases, the sprue can be manually moved on the
Do not show these messages again . If a new
Tooth Specific is selected the sprue is in the most
Mill tab.
User's manual