Planmeca FIT CAD System User Manual page 46

10 Scan tab overview
Dim mode
Colour tip
38 Planmeca FIT CAD/CAM system
The dim scanning mode can be used for scanning of bright surfaces in
mouth and on models to improve the scanning result. Use it for example for
gold restorations, bright white stone models etc.
To activate the dim mode, place the scanner over the surface you are about
to scan and then click the dim mode button.
This is an optional step to optimize the colour represented on screen. This
does not affect the stone model nor the amount of data collected by the
scanner.
To optimize the colour while in the scanning screen, click the colour symbol.
A new screen appears.
Before clicking Next, insert the scanner with sterilized colour tip into the
device as illustrated.
Another screen appears with the results.
If contamination occurs, clean with a germicide wipe. Do not autoclave.
Store the colour balancer in a plastic bag or keep a dust cover on it.
User's manual