Disconnect Device; Operational Safety Information - Xerox 6030 User Manual

The power cable is the disconnect device for this equipment. It is attached to the
back of the machine as a plug-in device. To remove all electrical power from the
equipment, disconnect the power cable from the electrical outlet.
Xerox equipment and supplies have been designed and tested to meet strict
safety requirements. These include safety agency examination, approval and com-
pliance with established environmental standards. To ensure the continued safe
operation of your Xerox/Fuji Xerox equipment, follow these safety guidelines at all
times.
• Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet
• Always locate the machine on a solid support surface (not on plush carpet) that has
• This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug will
fit only into an earthed electrical outlet. This is a safety feature. To avoid risk of
electric shock, contact your electrician to replace the electrical outlet if you are
unable to insert the plug into it. Never use a plug that lacks an earth connection
terminal to connect the product to an electrical outlet.
• Always follow all warnings and instructions that are marked on or supplied with the
• Always exercise care when moving or relocating equipment. Please contact your local Xerox/
• Always locate the equipment in an area that has adequate ventilation, and the room for
• Always use materials and supplies specifically designed for your Xerox/Fuji Xerox
• Always unplug this equipment from the electrical outlet before cleaning.
• Never use a plug that lacks an earth connection terminal to connect the product to an
• Never attempt any maintenance function that is not specifically described in this
• This equipment should not be placed in a built-in installation unless proper ventilation is
vi
Downloaded From ManualsPrinter.com Manuals

Operational Safety Information

Do These:
checked by a qualified electrician.
adequate strength to support the weight of the machine.
equipment.
Fuji Xerox Service Department, or your local support organization to arrange relocation of
the product to a location outside of your building.
servicing. See the Install guide for minimum dimensions.
equipment. Use of unsuitable materials may result in poor performance.
Do Not Do These:
electrical outlet.
documentation.
provided, please contact your Authorized local dealer for further information.

Disconnect Device

Safety Notes