Electrical Supply; Disconnect Device - Xerox Nuvera 100 Getting Started Manual

Xerox Nuvera

Electrical Supply

This product shall be operated from the type of electrical supply indicted on the product's data
plate label. If you are not sure that your electrical supply meets the requirements, please
consult a licensed electrician for advice.
WARNING
This equipment must be connected to a protective earth circuit. This equipment is supplied
with a plug that has a protective earth pin. This plug will only fit into an earthed electrical
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact
a licensed electrician to replace the outlet.
CAUTION
Always connect equipment to a correctly grounded power outlet. If in doubt, have the
outlet checked by a qualified electrician.

Disconnect device

The power cable is the disconnect device for this equipment and is attached to the back of the
machine as a plug-in device. To remove all electrical power from the machine, disconnect the
power cable from the electrical outlet.
Getting Started Guide
Safety and Notices
xi