C C E S S O R I E S
Select any other options for your job.
Press the Start button on the digital press Control Panel.
Feeding 3 Hole Drilled Paper
If you are stacking unstapled 3 hole drilled paper, the following is recommended:
• Send LEF Simplex (one sided) jobs to the Stack Tray.
• Send SEF Duplex (two sided) jobs to the Top Tray.
Using the Stack Tray for SEF Duplex jobs leads to an increase in uneven
stacking caused by an interference between the holes and corners of
You can minimize uneven stacking by loading 3 hole drilled paper SEF in
the paper tray with the holes toward the back of the digital press, and
selecting Collated sets.
Refer to the following chart only when sending stapled jobs through the Fiery
EX2000. Selections are made in the Print Driver window, or in Job Properties at
the Command Workstation.
When sending jobs scanned on the digital press to the HCSS for stapling, follow
the feeding instructions for both plain and 3 hole drilled paper in the Paper and
Paper Trays chapter.
I G H
A P A C I T Y
T A CK E R
2 0 60 /2 0 45
D O C U C O L O R
( H C S S )
T A P L E R
O P E R A T O R M A N U A L