Xerox DocuColor 2060 Operator's Manual page 209

2 06 0 /2 04 5
D O C U C O L O R
8
Press the Build Job Controls button at the top-right corner of the screen. The
Build Job Controls screen is displayed.
9
Choose the desired Segment Option:
• Touch the Proof Segment button to print out a proof set of the last segment
that was scanned.
• Touch the Delete Segment button to delete the last segment that was
scanned.
• Touch the Save Segment Programming button to save the programming
options for the last scanned segment for later use in the build job.
• Touch the Recall Segment Programming button to recall programming
that was saved for a previously scanned segment. This button is only
selectable after the first segment is scanned.
10
Choose the desired Job Preview/Completion option:
• Touch the Proof Set button to print out a proof set of all the segments
scanned for this build job.
• Touch the Cancel Job button to cancel the entire build job and exit the
Build Job feature.
• Touch the Build Job Complete button when you are finished compiling the
build job. The entire build job will be output to the printer.
11
When all segments are completed, press the Build Job Complete button. Every
segment that you programmed for this build job will be output to the printer as
one complete job.
O P E R A T O R M A N U A L
Figure 81. Build Job Controls Screen
S
C A N N E R
4–99