Xerox DocuColor 2060 Operator's Manual page 187

2 06 0 /2 04 5
D O C U C O L O R
If Front and Back Covers has been selected, you must indicate if there is an
image on either cover. Touch None for no image, Front Only if there is an image
on the front side of the Front Cover, Back Only if there is an image on the back
side of the Back Cover, or Front & Back for an image on the exterior side of both
covers.
Figure 61. Front and Back Covers Screen
4
If Front Cover Only, Back Cover Only, or Front and Back Covers have been
selected, you must indicate the tray from which the cover stock is fed.
5
Touch the Save button.
6
Continue selecting options for your job.
7
When you are finished selecting options, press the Start button.
O P E R A T O R M A N U A L
S
C A N N E R
4–77