Xerox DocuColor 2060 Operator's Manual page 268

P S
R O B L E M O L V I N G
6–2
Problem
The digital press does • Check the GFI circuit breaker switch.
not power on
• If the power in your location is working
(continued).
Prints are not on • Ensure that the proper paper is loaded in the
desired paper size.
• Select the paper size, tray and weight through
• Ensure that the correct weight is selected on
• Ensure that "Fit to Paper" or an equivalent
Misregistration of the • Go into Tools Mode and adjust registration.
scan to print image
from the Document
Glass.
Paper is misfed or • If a message appears on the Touch Screen,
wrinkles repeatedly.
• Ensure the proper paper (refer to the Paper
• Turn the paper stack around and/or over in the
• Remove a few sheets from the top and the
• Fan all four edges of the paper in the selected
• Replace the paper in the selected paper tray
• Remove any partially fed paper from the trays.
• Ensure the paper you are using had been
D O C U C O L O R
Suggested solutions
properly, you have tried the suggested
solutions, and the digital press power does not
power on, call for assistance.
paper trays.
the digital press options on your PC.
the tray.
selection is not selected in your print driver.
Refer to the Tools Mode in the System
Administration Guide.
follow the instructions displayed and refer to
the information in this chapter.
chapter of this manual and the Recommended
Materials List) is loaded correctly and not filled
above the MAX line.
selected paper tray.
bottom of the stack in the paper tray.
paper tray.
with paper from a new package.
stored properly.
2 0 60 /2 0 45
O P E R A T O R M A N U A L