Xerox DocuColor 2060 Operator's Manual page 113

2 06 0 /2 04 5
D O C U C O L O R
• The digital press with scanner will have difficulty recognizing the size of the
original if the following are placed on the Document Glass.
• Highly transparent originals, such as transparencies or tracing paper.
• Originals with dark edges.
• Photographs with dark edges and without a white border.
• Shiny originals.
• Originals with dark backgrounds.
• Thick originals such as books.
• Originals copied with the DADF open, and the area housing the digital
press is brightly lit.
Refer to Document Type/Dark Edges in Image Quality to scan originals with dark
edges.
5
Enter the required quantity of copies using the keypad.
If you enter an incorrect quantity, press the C (Clear) button.
6
Select any other required features by touching the button corresponding to the
feature. Some screens require that you touch Save to save your selections or
Cancel if the selection made is incorrect.
7
Press the Start button.
You can press Start while the digital press is warming up. The scanning process
begins automatically at the end of the warm-up time.
To stop the scan process, press the Pause button.
KEY POINT: Do not use excessive force to press down on the Duplex
Automatic Document Feeder when scanning bound documents.
KEY POINT: You may not use the Auto Color option if the Duplex Automatic
Document Feeder must remain open during scanning. The digital press with
scanner will not operate until you make a different selection under the Color
Mode feature.
For additional information on materials, refer to the Color Materials User Guide
and the Recommended Materials List for paper guidelines. The Recommended
Materials List is a downloadable file on www.xerox.com. Use the search
parameters DC 2060 or DC2045 and follow the path until you reach the files that
can be downloaded.
O P E R A T O R M A N U A L
S
C A N N E R
4–3