Loading Paper - Xerox DocuColor 2060 Operator's Manual

Loading Paper

2 06 0 /2 04 5
D O C U C O L O R
1
Pull out the tray slowly until it stops.
2
Load the correct size paper into the tray in the correct feeding orientation. Refer
to the orientation labels on each tray.
NOTE: Do not load materials above the MAX line located on the Edge Guide.
• Load the paper seam side (the side on which the ream of paper is sealed)
down in Tray 1 and Tray 2.
• Load the paper seam side (the side on which the ream of paper is sealed) up
in Tray 3.
NOTE: Many suppliers use arrows on the product labels to indicate the
preferred side to image first. Use this side (as signaled by the arrow) as
equivalent to the seam side when loading the paper.
Figure 5. Paper Orientation for Trays 1 and 2
O P E R A T O R M A N U A L
P P T
A P E R A N D A P E R R A Y S
3–13