Xerox DocuColor 2060 Operator's Manual page 315

2 06 0 /2 04 5
D O C U C O L O R
1
Open the Waste Dry Ink/Toner door at the back of the Exit Module. Refer to the
following figure.
2
Grasp the handle of the full bottle and pull it out of the machine.
3
Remove the cap from the cap holder on the side of the full bottle and press the
cap securely into the open hole on the top of the full bottle.
4
Dispose of the full bottle according to your local regulations.
5
Remove an empty bottle from the carton and insert it into the machine. Ensure
that the hole on the top of the bottle is open.
6
Close the Waste Dry Ink/Toner Bottle door.
O P E R A T O R M A N U A L
Figure 7. Waste Bottle Door opened
Open hole
Cap in
holder
Figure 8. Waste Dry Ink/Toner Bottle
M
A I N T E N A N C E
8–11