Disconnect Device - Xerox DocuColor 2060 Operator's Manual

S N
A F E T Y O T E S

Disconnect Device

xvi
WARNING: Never push objects of any kind into slots or openings on this
equipment. Making a contact with a voltage point or shorting out a part could
result in fire or electrical shock.
• If any of the following conditions occur, immediately switch off the power to
the machine and disconnect the power cord from the electrical outlet. Call
an authorized Xerox service representative to correct the problem.
– The machine emits unusual noises or odors.
– The power cord is damaged or frayed.
– A wall panel circuit breaker, fuse, or other safety device has been
tripped.
– Liquid is spilled into the press.
– The machine is exposed to water.
– Any part of the machine is damaged.
The power cable is the disconnect device for this equipment. It is attached to the
back of the machine as a plug-in device. To remove all electrical power from the
machine, disconnect the power cable from the electrical outlet.
D O C U C O L O R
2 0 60 /2 0 45
O P E R A T O R M A N U A L