Xerox DocuColor 2060 Operator's Manual page 270

P S
R O B L E M O L V I N G
6–4
Problem
Transparencies • Load the transparencies by following the
Transparencies are • Make 5 blank sheet copies with the Full Color
too oily.
• Refer to the Recommended Materials List and
Multiple sheets feed • Do not fill the paper trays above the MAX fill
from the paper trays.
• Remove the paper from the tray and fan the
• Predrilled sheets may stick together at the
• Paper and transparencies may stick together if
• Gently fan transparencies to separate the
D O C U C O L O R
Suggested Solution
instructions in Chapter 3, "Paper and Paper
Trays.
option on paper stock to purge excess oil from
system. Reload the transparencies and
continue the copying job.
the Color Materials Usage Guide for more
information about transparencies.
line indicator.
sheets to separate the joined sheets.
holes. Remove the paper from the tray and fan
the sheets to separate the joined sheets.
environmental conditions are too dry and
cause excessive static. Increase the humidity
level in the room to minimize static.
sheets before you load them.
2 0 60 /2 0 45
O P E R A T O R M A N U A L