Paper Stock Specifications - Xerox DocuColor 2060 Operator's Manual

H C S
I G H A P A C I T Y T A CK E R

Paper Stock Specifications

2 06 0 /2 04 5
D O C U C O L O R
( HC S )
The following papers are considered to be baseline/centerline and are
recommended to ensure you receive the best quality from your HCS:
Uncoated Xerox Digital Color Xpressions 94, 24 lbs. In Europe, Xerox Colotech+
2
90 g/m .
Coated Xerox Digital Color Xpressions GlossCoated Text (120 g/m
Europe, Xerox ColoTech Gloss Coated 120 g/m
NOTE: Manufacturers of coated stock do not recommend its use when the
ambient relative humidity exceeds 60%.
The Stack Tray accepts the following papers:
• Paper weights from a minimum of 64 g/m
coated or uncoated stock. It also accepts paper from 221 g/m
2
g/m with the possibility of degraded stack quality and an increased
jam rate.
• All standard media sizes supported by the digital press with the
exception of JIS B5 LEF (Asian standard size) and 8.5 x 11"/A4 SEF
• Non-standard sizes from 182 to 320 mm (7.2 to 12.6") across the feed
direction, and 203 to 488 mm (8.0 to 19.2") in the feed direction.
• 3 hole drilled 8.5 x 11" and A4 paper must be run LEF to the Stack Tray.
The Top Tray accepts the following papers:
• All media types, sizes, and weights that are supported by the digital
press.
• Duplexed 3 hole drilled paper must be fed short edge first, therefore
must be sent to the Top Tray.
O P E R A T O R M A N U A L
A
C C E S S O R I E S
2
/80 lbs.) In
2
.
2 2
up to 220 g/m - either
2
up to 280
5–25