Hole-Punched Paper; Guidelines For Printing On Hole-Punched Paper - Xerox Versant 3100 Press User Manual

Paper and Media

Hole-punched Paper

Guidelines for Printing on Hole-punched Paper

Hole-punched paper is defined as having two or more holes along one edge for use in
ring binders and notebooks.
Always refer to the following guidelines before using hole-punched paper:
• Paper with punched holes can be printed from all trays.
• Hole-punched paper can be loaded either in the LEF / portrait or SEF / landscape
direction.
• Position the holes along the feed edge, as shown on the image on the front of the
tray.
• Load hole-punched paper with the side to be printed on facing up.
• To prevent jams or damage, make sure that any plugs (pieces cut out of the paper
to create the holes) do not remain in the stack.
Loading Hole-punched Paper in Trays 1, 2, and 3
Load and align the edge of the hole-punched paper with the holes against the left edge
of the tray.
5-22
® ®
Xerox Versant 3100 Press
User Guide