Xerox DocuColor 2060 Operator's Manual page 272

P S
R O B L E M O L V I N G
6–6
Problem
Fresh copies used as This problem is caused by the oil used in the fusing
original documents process. The problem can be reduced or eliminated
cause jams in the by allowing output to sit for awhile so oil can
Duplex Automatic evaporate before using them as original
Document Feeder. documents.
Excessive paper curl Paper curl may be a result of:
(continued on the next
• Ensure that the correct paper weight and paper
page).
• The mass of dry ink (toner) coverage on the
• The paper weight.
• The humidity conditions at the digital press
• You can sometimes minimize curl problems by
• Attempt to minimize the amount of dry ink on
• Select the Full Color option instead of 3 Pass
• Empty the output device when output
D O C U C O L O R
Suggested Solution
type are selected.
copy - the greater the toner mass, the greater
the paper curl.
with scanner.
flipping the paper over in the tray and making
the copies again. If excessive curl is still
present, use a heavier paper.
the copy paper by selecting the Photo feature
as the Document Type and/or the lighter and/
or less chroma image quality options.
Color to minimize the amount of dry ink on the
copy paper.
approaches this limit to ensure continuous
production.
2 0 60 /2 0 45
O P E R A T O R M A N U A L