Using The Duplex Automatic Document Feeder (Dadf) - Xerox DocuColor 2060 Operator's Manual

Docucolor 2000 series
Hide thumbs Also See for DocuColor 2060:
Table of Contents

Advertisement

S
C A N N E R
4–6
Using the Duplex Automatic Document Feeder
(DADF)
1
Remove any paper clips or staples from the documents.
2
Place up to 50 same size or mixed size from 16 to 32 pound (64 to 128 g/m
documents face up in the DADF Tray. Slide the documents to the left until the
green Document Feed Lamp is lit.
3
Ensure that the paper guide is against the document.
4
Extend the DADF Output Tray to accommodate longer length output.
5
Press the Clear All button to clear any previous programming.
6
Touch the Basic Features tab.
7
Enter the required quantity of copies using the keypad.
If you enter an incorrect quantity, press the C (Clear) button.
8
Select any other required features by touching the button corresponding to the
feature. Some screens require that you touch Save to capture your selections.
9
Press the Start button to begin the scan operation. The original is fed from the
top of the stack to the Document Glass to be scanned then face down to the
DADF output tray on the right.
NOTE: If the DADF belt is dirty and the original is a thin or transparent
document, background may appear on the copy. This may also occur when copies
are made using the Document Glass. Place a white sheet of paper of the same
size on top of the document being copied to eliminate background until the belt is
cleaned.
For additional information on materials, refer to the Color Materials User Guide
and the Recommended Materials List for paper guidelines. The Recommended
Materials List is a downloadable file on www.xerox.com. Use the search
parameters DC 2060 or DC2045 and follow the path until you reach the files that
can be downloaded.
2 0 60 /2 0 45
D O C U C O L O R
2
)
O P E R A T O R M A N U A L

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucolor 2045

Table of Contents