High Capacity Stacker Stapler (Hcss); Identifying High Capacity Stacker Stapler Parts - Xerox DocuColor 2060 Operator's Manual

A
C C E S S O R I E S

High Capacity Stacker Stapler (HCSS)

Identifying High Capacity Stacker Stapler Parts

5–36
H
I G H
The High Capacity Stacker Stapler is an optional finishing device which provides
stacking with offset and single or dual stapling output capabilities. Sets of up to
2
50 sheets of 64 - 80 g/m may be stapled.
The High Capacity Stacker Stapler must be connected to the right end of the
digital press, replacing the Offset Catch Tray. The Stack Tray has a capacity of
2
2000 sheets of 64 - 80 g/m
provides separation between the stacked sets sent to the Stack Tray. The High
Capacity Stacker can also send output (not stapled) of 250 sheets of
2
64 - 80 g/m paper to the Top Tray.
Banner sheets can be used with your Fiery RIP. The banner sheets must be
printed on LEF 8.5" x 11" paper. Refer to the EX2000 Printing Guide for more
information on how to turn this feature on.
Figure 22. High Capacity Stacker Stapler
D O C U C O L O R
C S
A P A C I T Y T A CK E R
paper. The HCSS also has an Offset mode which
Top (or Purge) Tray
2 0 60 /2 0 45
O P E R A T O R M A N U A L
S ( H C S S )
T A P L E R
Offset Stacker
Stapler Tray