Stacker Mode; Offset Mode; Top Tray Mode - Xerox DocuColor 2060 Operator's Manual
Docucolor 2000 series
Hide thumbs
Also See for DocuColor 2060:
- System administration manual (144 pages) ,
- Color management manual (60 pages) ,
- Operator's manual (40 pages)
Table of Contents
Advertisement
H
C
S
I G H
A P A C I T Y
T A CK E R
.
2 06 0 /2 04 5
D O C U C O L O R
( HC S )
4
Touch Save.
5
Select any other options for your job.
6
Press the Start button on the digital press Control Panel.
Stacker Mode
The Stacker Mode stacks collated sets sent from the digital press. The stacker
tray has a capacity of 3500 sheets of 64 - 80 g/m
NOTE: Labels should not be sent to the Stack Tray.
Offset Mode
The Offset Mode offsets each set of sheets by 15 mm (0.6 inches) for easy
separation.
Top Tray Mode
The High Capacity Stacker diverts sheets that are too small or too large to be
stacked to the Top Tray. Any sheets that need to be purged after a paper jam are
also sent to the Top Tray.
NOTE: Only use the Top Tray when printing labels.
O P E R A T O R M A N U A L
2
paper.
Figure 17. Stacker Paper Path
Figure 18. Top Tray Paper Path
A
C C E S S O R I E S
5–29
Advertisement
Table of Contents
