Image Adjustments
This section includes:
■
"Setting the Original Size" on page 3-8
■
"Reducing or Enlarging the Image" on page 3-8
■
"Lightening or Darkening the Image" on page 3-9
■
"Adjusting the Contrast of the Image" on page 3-9
■
"Automatically Suppressing Background Variations" on page 3-9
■
"Adjusting the Color Balance" on page 3-10
"Erasing the Edges of Copy Documents" on page 3-10
■
Setting the Original Size
You can specify the size of the original so that the correct area is copied. To do this:
1.
On the control panel, press the Copy button.
2.
In the menu, select
Original
Note
You can press the Original Size shortcut button on the control panel to skip Steps 1
and 2.
3.
Select one of the preset sizes or
button.
For copies from the document glass,
■
Reduce/Enlarge, Poster 4x4, Edge Erase, and Auto Center options to pre-scan each
original to determine its size. Otherwise, the copy area is the same size as the copy
paper.
For copies from the document feeder,
■
as the copy paper.
Reducing or Enlarging the Image
You can reduce the image down to 25% of its original size or enlarge it up to 400% of its
original size. If desired, the images can be enlarged and printed on sixteen pages so you can
assemble them into a poster.
To reduce or enlarge the image:
1.
On the control panel, press the Copy button.
2.
In the menu, select Reduce/Enlarge, then press the Enter button.
Note
You can press the Reduce/Enlarge shortcut button on the control panel to skip Steps 1
and 2.
Size, then press the Enter button.
Tray/Auto
(the factory default), then press the Enter
Tray/Auto
Tray/Auto
WorkCentre® C2424 Copier-Printer
3-8
Adjusting Copying Options
works with the Book Copy, Auto
sets the copied area to the same size