Remote Programming Options; Programming Output Voltage With A 0-10 Vdc Voltage Source; Programming Output Current With A 0-10 Vdc Voltage Source; Readback And Status Indicators - Xantrex XPD 120-4.5 Operating Manual

Section 4. Remote Operation

Readback and Status Indicators

Remote
See
voltage and current limit using an analog source.
Programming
Options
Table 4.1 Remote Programming Options
Control of...
Output voltage
Current limit
Programming 1. Connect J210 pin 6 (remote voltage program select) to J210 pin 8 (auxiliary
Output
Voltage with a
2. Connect the control voltage source between pin 14 (voltage program) and pin 13
0-10 Vdc
Voltage
3. Vary the external voltage from 0-10 Vdc to cause the power supply output to
Source
Programming
1. Connect J210 pin 7 (remote current program select) to J210 pin 8 (auxiliary
Output
Current with
2. Connect the control voltage source between J210 pin 5 (current program,
a 0-10 Vdc
Voltage
3. Vary the external voltage from 0-10 Vdc to cause the power supply current limit
Source
Readback and Status Indicators
Voltage and Voltage Readback Connect a voltage monitoring device between J210
connector pin 15 (voltage readback - positive) and pin 13 (program return -
Current
negative).
Readback
Range: 0-10 V = 0-100% full rated voltage output of power supply
Current Readback Connect a voltage monitoring device between J210
connector pin 12 (current readback - positive) and pin 13 (program return -
negative).
Range: 0-10 V = 0-100% full rated current output of power supply
50
Table 4.1 for a summary of the options available to you for programming output
ground).
(program return).
vary from 0-100% of rated output voltage.
ground).
positive) and pin 8 (program return).
to vary from 0-100% of rated output.
Programming Scale
0-10 V voltage sources
0-10 V voltage sources
Operating Manual for XPD Series Power Supply