Table of Contents
Advertisement
X. Troubleshooting
Error
The Power is not on.
The Power is on but the system
cannot initiate.
LCD Screen is not on.
The system does not operate
even RUN button is pressed.
The system is running but does
not operate correctly.
The front door does not close.
A4(210X297)
1. Make sure the power connector is connected.
2. Check if the system is connected to the adaptor.
3. Check if the system power is pushed.
4. If everything above has been followed but the power is not on,
contact After Service.
1. Press the power button to block the power.
2. Check if the power was turned off abnormally.
3. When the system power was shut off abnormally, check if there
are any residues in tips and/or accessories in the system.
4. Remove any residues that may distract operating the system.
5. Manually move the syringe block of the interior desktop in the
center.
6. Turn the power on and check whether the system is initiating.
7. Request for After Service.
1.
It may be interior problem of the system, call for the After
Service.
1.
Check if the bracket lock is removed.
2.
Check if the system is initiating normally when the power is on.
3.
Check if there are any residues or obstacles in the system that
may interrupt operating.
4.
Check if all the accessories are inserted correctly.
5.
Check if other buttons in the LCD are working.
6.
Request for After Service.
1.
Check if the base plate is placed correctly.
2.
Check if there is remaining residues or any obstacles that may
interrupt operating the system.
3.
Check if all the accessories are inserted correctly.
4.
Request for After Service.
1.
Check if the base plate is placed correctly.
2.
After holding the door to open and when releasing the door to
be closed, check if the door is closed automatically by the
spring.
3.
Request for After Service.
-42-
ExiPrep
Fully Automated Nucleic Acid Extraction System
Solution
TM
16 Dx
Advertisement
Table of Contents
