Managing The Automatic Uv-Sterilization Mode - Bioneer ExiPrep 16 Dx User Manual

TM
VII. ExiPrep 16 Dx Setup (continued)

5. Managing the Automatic UV-Sterilization Mode

The instrument provides an automatic UV-Sterilization mode to sterilize the instrument after every DNA/
RNA extraction run.
A4(210X297)
Fully Automated Nucleic Acid Extraction System
1. Press the 'Setup' button to access the SETUP menu.
2. Press the 'Config' button to access the System Setup menu.
3. Press the 'UV lamp' button to enable automatic UV
sterilization.
If automatic UV-sterilization is enabled, a popup prompt
(UV Mode ON) appears and the UV lamp icon will turn
yellow.
Press the 'UV lamp' button again to disable the mode. A
popup prompt (UV Mode OFF) appears and the UV Lamp
icon will turn white.
-31-
TM
ExiPrep 16 Dx