Exiprep Tm 16 Dx Setup; Main Menu - Bioneer ExiPrep 16 Dx User Manual

TM
VII. ExiPrep 16 Dx Setup

1. Main Menu

Once the initialization has completed successfully, the LCD touchscreen will display the MENU
as shown below.
Please contact Bioneer Customer Service or your local sales representative if the initialization progress
bar does not change for over 5 minutes during initialization or if the MENU screen does not appear
after initialization.
Icon
A4(210X297)
Main Menu
Network Connection
This icon allows you to determine if the ExiPrep
the PC. If the icon is present, it means that the instrument is connected to
the PC via network and is possible to use the ExiStation™ Manager
Software to control the instrument.
Cooling Fan Operation
The Cooling Fan icon allows you to determine the status of the cooling fan.
'STORE OFF' means that the cooling fan is not operating, and 'STORE
ON' means that the cooling fan is currently running.
In order to keep the diagnostic kits refrigerated, you must press this icon
on the LCD touchscreen or click the 'STORE ON' icon in the ExiStation™
Manager Software to turn the cooling fan on.
Contamination protection accessory installation
This icon is to determine the status of the syringe block for setting the Tip
Protector and the contamination shield.
Power
This icon is to be pressed when power rebooting the instrument.
Fully Automated Nucleic Acid Extraction System
Description
-24-
TM
ExiPrep 16 Dx
TM
16 Dx is connected to