Configuring The System - Bioneer ExiPrep 16 Dx User Manual

TM
VII. ExiPrep 16 Dx Setup (continued)

6. Configuring the System

Only the single user with a registered administrator ID is able to configure the system. Do not forget the
administrator ID.
※ Factory (A/S menu): Only authorized service engineers may access this menu to service the
A4(210X297)
1. Press the 'Config' Button from the System Setup menu to
access the System Config menu.
Calibrates the
screen position
Screen: Calibrates the screen position
Calibrate the screen position relative to touching.
Press and hold the circle at the upper left corner with a
blunt tool for 2 seconds.
Press and hold the circle at the bottom right corner with a
blunt tool for 2 seconds.
Bright: Screen brightness adjustment
Adjust the brightness of the LCD touchscreen using the
'+' and '–' buttons.
Press the 'ok' button to save the adjusted brightness
level. The previous menu will be displayed when the
new brightness setting is successfully applied.
To return to the previous menu without saving the
adjustments, press the 'up' button.
instrument.
Fully Automated Nucleic Acid Extraction System
Adjusts the Manages user
screen IDs as well as
brightness administrator
-32-
TM
ExiPrep 16 Dx
Accessible
only by
authorized
ID engineers