Run (Not Used Pc) - Bioneer ExiPrep 16 Dx User Manual

3. RUN (Not used PC)

A4(210X297)
Fully Automated Nucleic Acid Extraction System
1. Connect the power cable to the rear of the instrument and
separate the LAN cable of the instrument.
2. Press the 'Store Off' button to turn the Cooling Block and
cooling fan on. The Cooling Block maintains the Elution Tube
Rack at a low temperature to keep the eluted nucleic acids and
nucleic acid-diagnostic kit mix refrigerated.
3. Press the 'START' button to access the PREP SETUP screen.
4. Refer to the code list within this Manual or purchased Kit Manual
to select the three-digit code
desired nucleic acid and sample source type.
5. Verify the 'Prep Type' and 'Sample SRC' of the three-digit code
you have entered.
6. Press the 'Enter' button to access the 'elution volume'
selection menu.
-14-
TM
ExiPrep
(38 page) applicable to your
16 Dx