2. Sample Preparation (Continued)
A4(210X297)
Fully Automated Nucleic Acid Extraction System
7. Punch holes in the sealing film of Buffer Cartridge ①
corresponding to the relative location and number of tubes and
tips, using the punch tool.
8. Punch holes in sealing the film of Buffer Cartridge ② using the
punch tool in the same pattern as Buffer Cartridge ①.
9. Place back the punched Cartridge on the Setup Tray.
10. Insert the sample tube on to the rack according to the number
of samples.
11. Insert the sample into the sample tube.
12. Place the sample tube rack from step 11 onto the Setup Tray.
13. Place the Waste Tray on the Setup Tray (between the tube
rack and the Buffer Cartridge ②.
-13-
TM
ExiPrep
16 Dx