Table of Contents
Advertisement
IV. Installing the ExiPrep™16 Dx (continued)
A4(210X297)
Fully Automated Nucleic Acid Extraction System
5.
Connect the power cable to the rear of the instrument.
6. Turn on the instrument. A power button will display on the
LCD touch screen to indicate normal power on.
7. Press the power button on the LCD screen to initialize the
instrument. A progress bar on the lower portion of the LCD
touchscreen will indicate initialization progress.
8. Open the door and remove the Sponge block (F) from the
Base Plate after initialization.
※ PC connect mode
9.
Connect the network hub power adapter to the network
hub and plug the adapter into a wall outlet.
-9-
TM
ExiPrep
16 Dx
Advertisement
Table of Contents
