TM
VII. ExiPrep
16 Dx Setup (continued)
4. Managing the Login Mode
The instrument provides a login mode for restricting non-registered use. Without a user ID, you would
have limited access to instrument functions. Do not forget your user ID.
※ Entering an invalid user ID three consecutive times with user login mode enabled will shut down the
system. Press the 'Power' icon on the LCD touchscreen to restart.
A4(210X297)
Fully Automated Nucleic Acid Extraction System
1.
Press the 'Setup' button to access the SETUP menu.
2.
Press the 'Config' button to access the System Setup menu.
3.
Press the 'User' button to enable login mode.
If the login mode is enabled, a popup prompt (User Mode
ON) appears and the user icon will turn blue.
Press the 'User' button again to disable user login mode.
A popup prompt (User Mode OFF) appears and the user
icon will turn white.
-30-
TM
ExiPrep
16 Dx