WAGO 750-486 Manual page 18

18 Device Description
Table 4: Compatibility List 750-486
Bus System
KNX
Various
Other fieldbus couplers/controllers on request!
The WAGO-I/O-CHECK commissioning tool can be used to configure the
required operating mode. The I/O module can also be parameterized via
PROFIBUS and PROFINET device description (GSD file).
The parameterization description can be found in the appendix in Section
"Configuration and Parameterization via GSD File with PROFIBUS DP and
PROFINET IO."
Manual
Version 1.1.2
Fieldbus Couplers/
Controllers
Controller
I/O IPC
WAGO-I/O-SYSTEM 750
750-486 4AI 0/4-20 mA, Ex i
Item No.
750-849
750-889
758-870/000-11x
758-874/000-11x
758-875/000-11x
758-876/000-11x
Revision Status
Firmware
09
10
09
09
09
09