Open" Menu Item; Save" Menu Item - WAGO 750-486 Manual

58 Commissioning
7.1.1.3.1.1

„Open" Menu Item

Only open parameter files created with WAGO-I/O-CHECK!
Please note that only parameter files created with WAGO-I/O-CHECK can be
opened. The parameter files have the extension *.ai.
In this menu item you can open and load an existing parameter file. Proceed as
follows:
1. Click the [File] button in the horizontal tab menu.
2. The application menu opens.
3. Click the [Open] button in the application menu.
4. A standard Windows dialog for selecting the source directory opens.
5. Select the parameter file that you want to open.
6. Click [Open] in the standard Windows dialog.
7. The parameter file opens.
7.1.1.3.1.2

„Save" Menu Item

Calibration settings are not saved!
Please note that the calibration settings cannot be saved in the parameter file.
Note the memory range!
Please note that only the settings are saved in the parameter file that you have
already transferred to the I/O module by clicking the [Write] or [Write all] buttons
in the main menu.
In this menu item you can save the changes you have made in a parameter file.
Proceed as follows:
1. Click the [File] button in the horizontal tab menu.
The application menu opens.
2. Click the [Save] button in the application menu.
A standard Windows dialog window for selecting the target directory then
opens.
Manual
Version 1.1.2
WAGO-I/O-SYSTEM 750
750-486 4AI 0/4-20 mA, Ex i