56
Commissioning
Figure 19: Title Bar in the Parameterization Dialog
The window title provides information about the position of the selected I/O
module within the fieldbus node used and the item number of the selected I/O
module.
7.1.1.2
Main Menu
Table 33: Buttons on the Main Menu
Button
7.1.1.3
Horizontal Tab Menu
The horizontal tab menu contains the following tabs:
Figure 20: Horizontal Tab Menu
Manual
Version 1.1.2
Function
[Connect]
[Disconnect]
[Read]
[Read all]
[Write]
[Write all]
[Channel x]
[Default settings]
WAGO-I/O-SYSTEM 750
750-486 4AI 0/4-20 mA, Ex i
Description
Creates a connection to the I/O
module
Interrupts an existing connection to
the I/O module
Reads all parameters of the
currently displayed view in the
application area of the I/O module.
Reads all parameters from the I/O
module including module, channel,
scaling and calibration settings.
Writes all parameters of the
currently displayed view in the
application area to the I/O module.
Writes all parameters to the I/O
module including module, channel,
scaling and calibration settings
Opens the channel selection list.
Resets all settings to factory
settings