Table 36: Channel Settings Menu Item - WAGO 750-486 Manual

WAGO-I/O-SYSTEM 750
750-486 4AI 0/4-20 mA, Ex i

Table 36: Channel settings Menu Item

Option
General Settings
Signal type
Activate input filter
(25 Hz)
Diagnostics
Activate diagnostics
function globally.
Show short circuit.
Show wire break.
Show measurement
range
overflow.
Show measurement
range
underflow.
Description
Channel deactivated
0-20 mA
*)
4-20 mA
3.6-21 mA (NAMUR
*)
NE43)
The software low pass filter is activated.

*)
The software low pass filter is deactivated.

*)
The "Activated diagnostics function globally"

diagnostics function is activated and is displayed in
the status byte.
The "Activated diagnostics function globally"

diagnostics function is deactivated and is not
displayed in the status byte.
*)
The "Display short circuit" diagnostic function is

activated and is displayed in the status byte.
The "Display short circuit" diagnostic function is

deactivated and is not displayed in the status byte.
*)
The "Show wire break" diagnostic function is

activated and is displayed in the status byte.
The "Show wire break" diagnostic function is

deactivated and is not display status byte.
*)
The "Measurement Overrange" is activated and is

displayed in the status byte.
The "Measurement Overrange" diagnostic function

is deactivated and not displayed in the status byte.
*)
The "Measurement Underrange" diagnostic function

is activated and is displayed in the status byte.
The "Measurement Underrange" diagnostics

function is deactivated and is not displayed in the
status byte.
Commissioning
The channel selected in the main
menu is deactivated.
If the channel is deactivated,
"0x7FFF" appears in the
Monitoring menu item under
process value "N/A" (not
available) and under
hexadecimal process value
„0x7FFF".
Measurement range
0 ... +20 mA
Measurement range
+4 ... +20 mA
Measurement range
+3.8 ... +20.5 mA
Version 1.1.2
63
Manual