Status Bar; Figure 34: Status Messages In The Application Window Of The Parameterization; Figure 35: Status Bar In The Parameterization Dialog - WAGO 750-486 Manual

WAGO-I/O-SYSTEM 750
750-486 4AI 0/4-20 mA, Ex i
Figure 34: Status Messages in the Application Window of the Parameterization Dialog
Click the [Delete] button to clear the status message history. The history is
automatically cleared if you interrupt the connection to the I/O module or close
the parameterization dialog.
7.1.1.7

Status Bar

The following information is displayed in the status bar:
• Status indication with display of the currently executed action as text or the
respective error message if an error occurs
• A progress bar is displayed as the actions are executed
• Online status
• IP address or COM interface

Figure 35: Status Bar in the Parameterization Dialog

The I/O module can also be parameterized via PROFIBUS and PROFINET
device description (GSD file).
The parameterization description can be found in the appendix in Section
"Configuration and Parameterization via GSD File with PROFIBUS DP and
PROFINET IO."
Commissioning 73
Manual
Version 1.1.2