7.2.1.3.4 "Open Parameter File" Menu Item; 7.2.1.3.5 "Save Parameter File" Menu Item - WAGO 750-451 Manual

WAGO-I/O-SYSTEM 750
750-451 8 AI RTD

7.2.1.3.4 "Open Parameter File" Menu Item

In this menu item, you can open and load an existing parameter file. Please
proceed as follows:
1. Click the [Open parameter file] button in the main menu.
2. A standard Windows dialog appears to select the source directory.
3. Select the parameter file you want to open.
4. Click [Open] in the standard Windows dialog.
5. The parameter file is opened.

7.2.1.3.5 "Save Parameter File" Menu Item

Important note!
Please note that the calibration settings are not saved in the parameter file.
In this menu item, you can save the changes you selected and made to a parameter
file. Please proceed as follows:
1. Click the [Save parameter file] button in the main menu.
2. A standard Windows dialog appears to select the target directory.
3. Select the target directory to which the new parameter file should be saved.
4. Click [Save] in the standard Windows dialog.
5. The parameter file is saved to the target directory you selected.
Manual
Version 1.1.0
Commissioning 85