Prime Line Preference; Privacy Release Groups - NEC ML440 Quick Setup Manual

ML440 Wireless IP DECT Quick Reference Guide
32 | DSX |
To Park your current outside call in a System Park Orbit:
1. Do one of the following:
a) Press
Transfer
b) Press a Park Feature Key.
The Park Feature Key flashes while the call is parked.
2. Press END to hang up.
To retrieve a call parked in a System Park Orbit:
1. Press .
TALK
2. Do one of the following:
a) Dial then the announced System Park Orbit (60-69).
*
b) Press a Park Feature Key.
3. Talk to the outside caller.
To Park your current outside call at a co-worker's extension (Personal Park):
1. Press Transfer
2. Dial then the number of the extension at which you want to Park the call.
**
3. Press to hang up.
END
a) The line key flashes while the call is parked.
To retrieve a call parked at a co-worker's extension (Personal Park):
1. Press TALK .
2. Dial then the number of the extension at which the call is parked.
**
3. Talk to the outside caller.

Prime Line Preference

Prime Line Preference is set to Intercom by default.
To place a call on your Prime Line:
1. Press .
TALK
2. Dial the call normally.
a) To bypass your Prime Line, press another line key before pressing
b) If you don't have Intercom Prime Line Preference enabled, be sure your handset is programmed with an
Intercom Feature Key. Otherwise, you won't be able to place Intercom calls.

Privacy Release Groups

Privacy Release Groups is disabled by default.
(soft key 3), dial , and then dial the System Park Orbit (60-69).
*
(soft key 3).
TALK .