Factory Defaults - Rain Bird ESP-LXIVM Series Installation, Programming & Operation Manual

Factory Defaults

Restore the ESP-LXIVM controller's factory default settings.
Turn the controller dial to Advanced Settings
A
At the IQ / ADVANCED screen, press the Down Arrow key to select
Factory Defaults, then press Next.
B
At the confirmation screen, press and HOLD the Yes key for 4 sec-
onds to Restore Factory Defaults. If you're not sure, press No.
A
IQ / ADVANCED
Store/Recall Programs
Factory Defaults
Configure Cartridge
About this LX-IVM
Next
95 ESP-LXIVM Series Controllers
B
Restore Factory Default
Are you sure? Press and hold
Yes to proceed.
Yes No
C
A confirmation screen shows the process is complete.
C
Restored Factory Defaults
NOTICE
Be very careful about using the Factory Default as an option
as all previous settings, including 2-Wire Device addresses,
will be permanently cleared from system memory. Consider
using the Clear All Programs option instead so that your
2-Wire Device addresses will not be erased.