D
Orient the NCC cartridge so that the two bottom hinges fi t into
the hinge openings at the bottom of the cartridge bay. Then gen-
tly swing the cartridge up into place, snapping the top-latch.
D
E
Route the Cartridge Connector Cable through the cable channel
on the back of the controller front panel.
E
117
ESP-LXIVM Series Controllers
Confi gure NCC Cartridge
Setup Wizard
Turn the controller dial to Advanced Settings
A
At the IQ / ADVANCED screen, press the Down Arrow key to select
Confi gure Cartridge, then press Next.
B
At the IQNCC-RS Cartridge screen with Setup Wizard selected,
press Next.
A
IQ / ADVANCED
Store/Recall Programs
Factory Defaults
Configure Cartridge
About this LX-IVM
Next
B
IQNCC-RS Cartidge
Setup Wizard
NCC Configurator
Status
IQNet Alarms
Next