Set Flow Rates; Learn Flow Automatically; All Stations - Rain Bird ESP-LXIVM Series Installation, Programming & Operation Manual

Set Flow Rates

The LX-IVM controller lets you set the flow rates you expect or to
automatically Learn Flow rates based on real usage.
If you do not have flow sensing hardware installed you may be able
to estimate flow rates based on the irrigation hardware installed on
a particular station or FloZone and manually enter this rate.
FloZone flow rates are either:
• Automatically set to the highest station flow rate assigned to the
FloZone, or
• Manually adjusted by the user.

Learn Flow Automatically

B
NOTE: To ensure accurate recording of flow rates, do not create
any manually-generated flow such as flow created with manu-
ally operated quick coupling valves, while a Learn Flow is taking
place.
75 ESP-LXIVM Series Controllers

All Stations

B
NOTE: Ensure you have Run Times set up for all stations included
in a Learn Flow exercise prior to setting up a Learn Flow.
Turn the controller dial to Flow Sensor
A
At the FLOW SENSOR screen, with Set Flow Rates selected, press
Next.
B
At the Set Flow Rates screen, with Learn Flow selected, press Next.
A
FLOW SENSOR
Set Flow Rates
Set FloManager
Set FloWatch
Current Flow Reading
Set Flow Units
Next
B
Set Flow Rates
Learn Flow
Set Station Rates
Set FloZone Rates
View Flow Rates
Clear Flow Rates
Next