Ncc Configurator - Rain Bird ESP-LXIVM Series Installation, Programming & Operation Manual

Client Satellite
A
At the IQNCC-RS Setup screen, press the + and – keys to select
Client satellite; then press Next.
B
A confirmation screen shows the address of the selected IQ
Satellite. Press Next.
A
IQNCC-RS Setup
Satellite Type
Client
Connects to IQ and
Client Satellites
Back
Next
C
At the Radio Port screen, press the + and – keys to select the
desired port option; then press Next.
D
At the CM Port screen, press the + and – keys to select the desired
port option; then press Next.
C
IQNCC-RS Setup
Radio Port
Radio Installed
Back Next
E
At the CM Port Termination screen, choose the ON and OFF
buttons; then press Next.
E
IQNCC-RS Stetup
CM Port Termination
ON
Only select ON if
Satellite is at end
of IQNet wire path
On Off Back Next
119 ESP-LXIVM Series Controllers
B
IQNCC-RS Setup
Client Satellite
Address
001
[Range: 002 to 256]
Back
Next
D
IQNCC-RS Setup
CM Port
Module Installed
Back Next

NCC Configurator

Turn the controller dial to Advanced Settings
A
At the IQ / ADVANCED screen, press the Down Arrow key to select
Configure Cartridge, then press Next.
B
At the IQNCC-RS Cartridge screen, press the Down Arrow key to
select NCC Configurator, then press Next.
A
IQ / ADVANCED
Store/Recall Programs
Factory Defaults
Configure Cartridge
About this LX-IVM
Next
B
IQNCC-RS Cartidge
Setup Wizard
NCC Configurator
Status
IQNet Alarms
Next