Flozones; Weather Sensors - Rain Bird ESP-LXIVM Series Installation, Programming & Operation Manual

FloZones

A
At the Station Setup screen, press the Down Arrow key to select
FloZones, then press Next.
B
At the Assign FloZone screen you can assign stations to FloZones.
Press the + and – keys to view and select from available FloZones.
A
Station Setup
STA 001
Set Priority
FloZones

Weather Sensors

Next
B
NOTE: If you have already set up your MVs and FloZones, the MV
assignments for the currently selected FloZone will be shown in
the bottom portion of the screen. See "Master Valves" on page
24 for more details.
30 ESP-LXIVM Series Controllers
B
Station Setup
Assign FloZone
001
STA
FloZone: 01
MV 1 2 3 4 5 6 7 8 9 10
Y Y Y Y Y Y Y Y Y Y
Done
Weather Sensors
A
At the Station Setup screen, press the Down Arrow key to select
Weather Sensors, then press Next.
B
At the Assign Weather Sensors screen you can assign stations to
obey a particular weather sensor. Press the + and – keys to set Y,
for weather sensors which that station should obey, or set N, for
sensors which that station should ignore. Press the Arrow keys to
navigate between the number setting fields.
A
Station Setup
001
STA
Set Priority
FloZones
Weather Sensors
Next
B
NOTE: All weather sensors, both LX-IVM-Sensor 2-Wire con-
nected and local, can be turned on (Active) or off (Bypassed)
using the Weather Sensors switch on the controller front panel.
See"Weather Sensors" on page 26 for more details.
H
Repeat this process to set up additional sensors.
B
Station Setup
Assign Weather Sensors
STA 001
Local WS 1 2 3 4 5 6 7
Y Y Y Y Y Y Y Y
Done
Yes No