Test All Stations
You can test all stations connected to the controller by running each
of them in station number sequence.
Turn the controller dial to Manual Watering
A
At the Manual Watering screen, press the Down Arrow key to
select Test All Stations, then press Next.
B
At the Test All Stations screen, press the + and – keys to set the
Test Time (from 1 to 10 minutes), then press Run.
A
Manual Watering
Start Station
Start Program
MV Water Window
Test All Stations
Next
101
ESP-LXIVM Series Controllers
B
Test All Stations
Minutes
Test Time
01
Run
C
The Confirmation screen with Station Test Started appears.
C
Station Test Started