Cyclic Days - Rain Bird ESP-LXIVM Series Installation, Programming & Operation Manual

Cyclic Days

Turn the controller dial to Water Days
A
At the Watering Cycle screen, press the Mode key to navigate to
the Cyclic Days screen.
B
NOTE: If the desired program is not selected, press the Program
Select button to choose the desired program. See "Program
Select Button" on page 41 for more details.
B
At the Day Cycle screen, press the + and – key to set the watering
day cycle (from 1 to 30 days). For example, set to 03 if you want to
water every third day, then press the Down Arrow key.
A
PGM 01 Mon On On
Tue Off
On
By Day of Week Wed
Thu
Off
Fri
On
Sat Off
Sun Off
Mode
Off On
46 ESP-LXIVM Series Controllers
B
PGM 01 Mon Yes
Tue Yes
Cyclic days
Yes
Wed
Water every 01 days 03
Thu
Yes
Start 14 Jan 2018
Fri
Yes
Allow watering
Sat Yes
Sun Yes
Mode
C
Press the + and – keys to set the first date for the Watering Cycle
to begin, then press the Down Arrow key.
• Press and HOLD keys to accelerate settings.
D
Press the Yes key to allow irrigation to start on a given day of the
week or else press No to prevent irrigation from starting that day.
Press the Arrow keys to navigate across the week.
C
PGM 01
Mon Yes
Tue Yes
Cyclic days
Wed Yes
Water every 01 days
Thu Yes
Start 14 Jan 2018 23 Apr 2019
Fri Yes
Allow watering
Sat Yes
Sun Yes
Mode
H
Press the Program Select button and repeat this process to
select Cyclical Watering for other programs as desired.
B
NOTE: Watering day selections carry over to Watering Days dial
positions and vice-versa. See "Select Water Days" on page 45
for more details.
4
PGM 01
Mon Yes Yes
Tue Yes
Cyclic days
Wed Yes
Water every 01 days
Thu Yes
Start 23 Apr 2019
Fri Yes
Allow watering
Sat Yes
Sun Yes
Mode Yes No