Selected Stations - Rain Bird ESP-LXIVM Series Installation, Programming & Operation Manual

C
At the LEARN FLOW MENU screen, with All Stations selected,
press Next.
D
A confirmation screen appears; press Next again.
C
LEARN FLOW MENU
All Stations
Selection Stations
Next
E
An information screen appears; press Next again.
F
To start the Learn Flow exercise immediately, press Next. Or else
press the + and – keys to set a delayed start time. Press the Arrow
keys to navigate between the number setting fields.
B
NOTE: You can choose to run the exercise Now (00:00) or choose
a timed delay of up to 24 hours.
E
Learn Flow
1. Station Address
2. Station Runtime
3. High/Medium/Low
Priority
4. Assigned MV
Next
G
A confirmation screen appears, confirming the Learn Flow will
overwrite the existing flow rates. Press Start to set the Learn Flow
exercise.
H
The Learn Flow Starting confirmation screen shows the time
delay until the Learn Flow operation will start.
G
Attention
Learn Flow will
overwrite
existing learned
flow rates
Start
76 ESP-LXIVM Series Controllers
D
Learn Flow will work
only
for stations with...
Next
F
Learn Flow
Start Learn Flow In
00 : 00
HH:MM
Next
H
Learn Flow
Starting Now
B
NOTE: An alarm will be posted if one or more stations learn a
flow rate of 0 (zero). Check the valve and 2-Wire Device if you
receive this alarm.
NOTICE
Be sure to Learn Flow again if you make any changes to your
system which affect its hydraulics.

Selected Stations

B
NOTE: Ensure you have Run Times set up for all stations included
in a Learn Flow exercise prior to setting up a Learn Flow.
Turn the controller dial to Flow Sensor
A
At the FLOW SENSOR screen, with Set Flow Rates selected, press
Next.
B
At the Set Flow Rates screen, with Learn Flow selected, press Next
A
FLOW SENSOR
Set Flow Rates
Set FloManager
Set FloWatch
Current Flow Reading
Set Flow Units
Next
B
Set Flow Rates
Learn Flow
Set Station Rates
Set FloZone Rates
View Flow Rates
Clear Flow Rates
Next