Rain Bird ESP-LXIVM Series Installation, Programming & Operation Manual page 77

C
At the LEARN FLOW MENU screen, press the Down Arrow key to
select Select Stations, then press Next.
D
A confirmation screen appears; press Next again.
C
LEARN FLOW MENU
All Stations
Select Stations
Next
E
An information screen appears; press Next again.
F
Press the Arrow keys to navigate the list of stations. Press the Yes
and no keys to set which stations you want to include in the Learn
Flow exercise, then press Next to continue.
B
NOTE: You can choose to run the exercise Now (00:00) or choose
a timed delay of up to 24 hours.
E
Learn Flow
1. Station Address
2. Station Runtime
3. High/Medium/Low
Priority
4. Assigned MV
Next
77 ESP-LXIVM Series Controllers
D
Learn Flow will work
only
for stations with...
Next
F
Include in Learn Flow
Sta003 Yes
Yes No Next
G
To start the Learn Flow exercise immediately, press Next. Or press
the + and – keys to set a delayed start time. Press the Arrow keys
to navigate between the number setting fields.
H
A confirmation screen appears, confirming the Learn Flow will
overwrite the existing flow rates. Press Start to set the Learn Flow
exercise.
G
Learn Flow
Start Learn Flow In
00 : 00
HH:MM
Next
I
The Learn Flow Starting confirmation screen appears, confirming
the time delay until the Learn Flow operation will start.
I
Learn Flow
Starting Now
B
NOTE: An alarm will be posted if one or more stations learn a
flow rate of 0 (zero). Check the valve and 2-Wire Device if you
receive this alarm.
NOTICE
Be sure to Learn Flow again if you make any changes to your
system which affect its hydraulics.
H
Attention
Learn Flow will
overwrite
existing learned
flow rates
Start