Weather Sensors; Sensor Types; Set Up Weather Sensors (Optional) - Rain Bird ESP-LXIVM Series Installation, Programming & Operation Manual

G
Press the + and – keys to select Yes for NOMV Cycling, then press
the Right Arrow key.
H
Press the + and – keys to set the Cycle Time, then press Next.
G
NOMV Cycling
Cycle MV 02 Yes
Cycle start time for all
NOMV 12:00 PM
Next
I
At the FloZone assignment screen, press the + and – keys to asso-
ciate the MV with the appropriate FloZone, then press Next.
B
NOTE: A FloZone may have multiple MVs as it's source(s), but an
MV can only be assigned to a single FloZone.
J
The Shared MVs screen shows the other MVs associated with
the selected FloZone. Press the Arrow keys to scroll the list of
FloZones, then press Next to continue.
I
Assign Master Valve to
one FloZone
MV 02 FZ 02
(a flow Zone may have
multiple master valves)
Next
K
A review screen shows the settings for the MV.
K
MV 2 = FloZone 2
MV 2 shares a common
mainline with:
MV 1 2 3 4 5 6 7 8 9 10
-- Y N N Y N N N N N
Done
H
Repeat this process to set up additional master valves. Be sure
to note each MV on your Programming Guide for future refer-
ence.
26 ESP-LXIVM Series Controllers
H
NOMV Cycling
Cycle MV 02 Yes
Cycle start time for all
NOMV 12:00 PM
Next
J
MV 1 2 3 4 5 6 7 8 9 10
FZ
1 N N N N N N N N N N
2 N Y N N N N N N N N
3 N N Y N N N N N N N
4 N N N Y N N N N N N
Next

Weather Sensors

Weather Sensor Setup tells the ESP-LXIVM controller what types of
weather sensors are used by your irrigation system.
Weather sensors are not required for the LX-IVM controller, but they
increase functionality by allowing irrigation control based on chang-
ing weather conditions.
• The LX-IVM supports three 2-Wire Device weather sensors and
the LX-IVM Pro supports seven.

Sensor Types

Type
Rain
Wind
Freeze
Soil Moisture
Custom Pause
Custom Prevent
Action
Prevent
Pause
Pause
Prevent
Pause
Prevent