Flowatch™ On/Off - Rain Bird ESP-LXIVM Series Installation, Programming & Operation Manual

FloWatch™ On/Off
Turn the controller dial to Flow Sensor
A
At the FLOW SENSOR screen, press the Down Arrow key to select
Set FloWatch, then press Next.
B
At the FloWatch screen, with FloWatch selected, press On/Off,
then press Next.
A
FLOW SENSOR
Set Flow Rates
Set FloManager
Set FloWatch
Current Flow Reading
Set Flow Units
Next
85 ESP-LXIVM Series Controllers
B
FloWatch
FloWatch On/Off
Set Flow Limits
Set Flow Actions
Next
C
Press the On key to turn on FloWatch, or else press Off to disable.
C
FloWatch
On
On Off Done
B
NOTE: Once FloWatch is enabled we recommend that you Learn
Flow or manually enter flow for all stations and FloZones if you
have not already done so. This will allow FloWatch to react
appropriately to the High Flow and Low Flow settings.