About This Manual; Scope And Nomenclature; Recipients; Symbols - Ingeteam INGECON SUN 1Play TL M U Series Installation And Operation Manual

Ingeteam

1. About this manual

This manual describes the INGECON SUN 1Play TL U M units and provides information for their correct reception,
installation, start-up, maintenance and operation.

1.1. Scope and nomenclature

This manual is applicable to the following units:
This document will refer to the various models by both their complete name and their abbreviation. Similarly, it will
refer generically to any of the models in the INGECON SUN 1Play TL U M families with the terms unit or inverter.

1.2. Recipients

This document is intended for qualified personnel.
The status of qualified personnel referred to in this manual will be, as a minimum, that which meets all the
standards, regulations and laws regarding safety applicable to the tasks of installing and operating this unit.
The responsibility for designating qualified personnel will always fall to the company to which the personnel
belong. It is necessary to decide which workers are suitable or not for carrying out specific work to preserve their
safety at the same time as complying with occupational safety legislation.
These companies are responsible for providing appropriate training in electrical equipment to their personnel and
for familiarizing them with the contents of this manual.

1.3. Symbols

This manual uses various symbols to emphasize and highlight certain texts. The general meanings are explained
below.
General warning.
Electrical danger.
Hot surface.
10
Complete name
INGECON SUN 1Play 2.8TL U M
INGECON SUN 1Play 3.3TL U M
INGECON SUN 1Play 5TL U M
INGECON SUN 1Play 6TL U M
Abbreviation
2.8TL U M
3.3TL U M
5TL U M
6TL U M
General information.
Read the section indicated in this manual.
Prohibition.
ABE2013IQM01_ - Installation and Operation Manual
About this manual