Introduction
Overview
The ZCU216 is an evaluation board featuring the ZU49DR Zynq
device. This board enables evaluation of applications requiring sub-6 GHz Bands for Radio,
mmWave, and full L-band and S-Band in Phased Array Radar. The ZCU216 board is equipped
with all the common board-level features needed for design development like DDR4 memory,
networking interfaces, an FMC+ expansion port as well as access to the RFMC 2.0 interface.
Document Audience and Scope
The purpose of this guide is to familiarize system architects, software developers, and hardware
designers with the ZCU216 evaluation board. The ZCU216 evaluation board features the Zynq
UltraScale+ RFSoC ZU49DR. The ZCU216 board enables the demonstration, evaluation, and
development of numerous applications.
Additional Resources
See
Appendix E: Additional Resources and Legal Notices
resources relevant to the ZCU216 evaluation board.
Block Diagram
A block diagram of the ZCU216 evaluation board is shown in the following figure.
UG1390 (v1.1) July 10, 2020
ZCU216 Board User Guide
Chapter 1: Introduction
Chapter 1
®
UltraScale+™ RFSoC Gen3
for references to documents, files, and
Send Feedback
www.xilinx.com
5